Honda Power Equipment HSS1332TC

$4,399.00


Availability
Brochure
Manufacturer
Honda Power Equipment
Model
HSS1332TC

Overview

Description

The dual stage, track drive HSS1332TC is powered by the reliable, easy starting Honda GX390T2 commercial grade OHV (overhead valve) engine, clears a path 81.0 cm (31.9 in) wide and 51.0 cm (20.1 in) high and provides snow discharge up to an amazing 65 metric tons per hour, at a distance of up to 17 m (56 ft), all with reduced operational noise. The variable speed hydrostatic transmission features a single lever for quick switching between forward and reverse, and for accurate adjustment of ground speed without affecting auger rotation speed, while the hydraulic-assist auger height adjustment control allows on-the-fly adjustment of auger height for optimum performance in varying snow conditions. It comes with a 3 year residential/commercial warranty, it's certified to meet or exceed EPA emissions guidelines, it's highly operator-friendly, and the HSS1332TC has the Honda power and technology to clear the heaviest snowfalls and the largest areas with ease. Maximum ground speeds have been increased by 14% in forward and 6% in reverse to get the job done faster than ever before.

Features
  • Track drive, 2 stage snowblower with improved Honda performance and durability
  • 81.0 cm (31.9 in) clearing width / 51 cm (20 in.) clearing height
  • Moves up to 65 metric tons of snow per hour with a discharge distance up to 17 metres (56 ft.)
  • Uses: Residential or Commercial snow removal
Additional Features
  • Standard work light
  • Built-in icing guard design prevents icing in the carburetor and provides better access to the carburetor drain bolt and fuel cut-off lever
  • Honda Dual Track Drive system with pliable, low-temperature rubber tracks and sure-gripping cleats provides solid traction and ideal balance, even on steep driveways and steps
  • Track drive with auger height adjustment allows the augers to glide over uneven surfaces such as stone driveways and sidewalks
  • Hydraulic assist auger height adjustment control requires only a slight downward or upward pressure on the right control lever to precisely angle the auger housing to skim uneven gravel or interlocking brick surfaces, or to dig deep to clear smooth asphalt or concrete
  • Revised pulley ratios allow a reduction in maximum engine rpm and an increase in maximum impeller speed, resulting in reduced noise during operation and increased snow-throwing distance
  • Taller fuel cap with chain attachment makes refuelling easier, even while wearing gloves or mitts. In case of overfill, a run out in the tank design keeps gas spillage away from the engine and track
  • Automotive-grade steel auger housing for strength and durability
  • Redesigned chute with reinforcement plate for long service life
  • Interconnected drive/auger lever design with interlock feature allows both drive and auger levers to be held down with one hand, freeing the other hand for discharge chute, throttle and ground speed adjustments
  • Reversible, two position skid shoes for versatility and extra-long service life (300% longer than previously)
  • Ice breaking, heavy-duty, serrated augers easily break through heavily crusted or hard packed snow left behind by municipal snowplows
  • Ergonomically-designed controls for operator convenience and safety
  • Oil drain extension makes servicing the engine easier and reduces the risk of oil getting on the track during oil changes
  • Large starter recoil handle for an easy grip – even with a bulky mitt
  • Easy, reliable starts in any weather condition with automatic decompression system and electronic ignition
  • Large 5.7 litre tank with standard fuel gauge provides extended run times between fill ups
  • Snow discharge chute turns a full 201 degrees (92 degrees to the right and 109 degrees to the left) on a heavy duty worm gear with remote manual crank
  • Easy to operate choke lever design
  • Teflon coated cables are extremely durable and won't seize up in severe conditions
  • Reduced engine noise due to a large muffler design and standard deflector is especially welcome for early morning snow clearing or for operation close to nearby properties
  • Unique Honda shear bolt positioning allows for almost effortless removal, alignment, and replacement of both impeller and auger shear bolts when required – with no need for special tools
  • Side cover for the auger clutch cables protects against snow intrusion, assuring workability in severe conditions
Specifications
  • Axle Type: Track drive
  • Drive Type: Hydrostatic transmission (HST)
  • Transmission Oil Capacity: 0.75 Litre (26.4 fl. Imp. oz)
  • Recommended Oil: Honda hydrostatic transmission fluid
  • Speeds: Infinitely variable
  • Maximum Ground Speed: Forward : 59.4 m/min. (194.9 ft./min) Reverse : 40.8 m/min. (133.9 ft./min)
  • Clearing Width: 81.0 cm (31.9 in)
  • Intake Housing Height: 51.0 cm (20.1 in)
  • Auger Diameter: 35.5 cm (14.0 in)
  • Auger Type: Steel serrated (Spiral)
  • Auger Drive: Belt driven shaft
  • Auger Transmission: Screw gear
  • Auger Oil Capacity: 0.16 Litre (5.6 fl. Imp. oz)
  • Recommended Oil: SAE #90 gear oil
  • Auger Height Adjustment: Gas assist
  • Chute Rotation: Remote manual crank
  • Chute Turning Radius: 201°
  • Deflection Control: Remote manual lever
  • Chute Material: Steel
  • Maximum Throw Distance *: 17 m (56 ft)
  • Clearing Snow Volume Capacity *: Up to 65 metric tons (72 tons/hr)
  • Engine Type: 4-stroke, OHV, single cylinder
  • Honda Engine Model: GX390T2
  • Displacement: 389 cc (23.7 CID)
  • Ignition System: CDI magneto
  • Recoil Starter: Standard
  • Electric Starter: N/A
  • Lubrication System: Forced splash
  • Oil Capacity: 1.1 Litre (38.7 fl. Imp. oz)
  • Recommended Oil: SAE 5W30 API service classification SJ or later
  • Fuel Capacity: 5.7 Litres (1.25 Imp. gal)
  • Recommended Fuel: Unleaded gasoline (Pump octane rating 86 or higher)
  • Operational Time per Tankful **: 1.8 hours
  • Wheel/Tire Size: N/A
  • Overall Length: 146.5 cm (57.7 in)
  • Overall Width: 82.5 cm (32.5 in)
  • Overall Height: 112.5 cm (44.3 in)
  • Dry Weight: 120.0 kg (264.6 lb)
  • Lighting Coil: Standard
  • WorkLight: Standard
  • Warranty: 36-month, non-commercial use / 36-month, commercial use distributor’s warranty
Accessories
  • Commercial Grade Skid Shoes
  • Drift Breaker Kit
NOTES:
Throw distance varies with snow conditions. Warranty: As a testament to their quality and reliability, most Honda snowblowers come with a warranty of 36 months for non-commercial use and 36 months for commercial use.

Specs

Engine

Engine Type
GX390T2 4-stroke, OHV, single cylinder
Engine Manufacturer
Honda
Engine Displacement
389 cc (23.7 CID)

General

Width
82.5 cm (32.5 in)
Starting
Recoil
Max Discharge
17 m (56 ft.)
Drive Type
Hydrostatic transmission (HST)
Weight
120 kg (264.6 lb.)
Fuel Capacity
5.7 L (1.25 Imp. gal.)

Related Products